2001 Toyota Corolla "problems highlander gas cap" Questions

...Highlander (AWD V6) Hello, My check engine light is on and I found my gas cap loose. I have secured it and wondered when/if the check engine lite will got off if that was the problem. I have been ...

...Highlander won't start and has the "Check VSC System" and "Check Hybrid System" warnings: Battery problem: The battery may not have enough strength or power to start the car. A qualified technician ...

...Help me. your engine computer has detected a problem and cut light on. check your gas cap if this is loose it will turn light on. if not will need to have code pulled. autozone will do this for ...

highlander? When the lights came on I removed and replaced gas cap. I then disconnected the battery and this cleared the lights. Drove car and after 5 miles light came on agin. Did this twice. Got car

...problems and the only way is to pressure test the system.was the gas cap replaced because of an evap code? excess water vapor leaking back into the intake manifold could trigger an evap code and fool ...

...Highlander is the same as the 03 in this respect but I would check behind the air filter housing and look for a small black hose and feel if it is properly connected to a metal tube that runs up from ...

Highlander. I smell a gasoline smell intermittently. I have unscrewed and retightened the gas cap twice so I don't think that is the problem. I have an appointment to take it in in a few days,

...highlander. auto zone said it was gas cap. i changed the air filter n it came back on then i took the little filter on top of air filter out with a pry bar out and reset it by taking batt post off 15 ...

...Highlander 2003 4 cylinder Last time they charged me $125 for new gas cap to turn off the light. If I do nothing will it hurt anything? Car runs fine and only have 46K miles on it. if it's just an ...

...gas cap that is not sealeing, try replacing the gas cap with an OEM grade gas cap, then disconnect the negative battery cable for ten seconds, this clears the codes, wait and see if the check ...