2001 Toyota Corolla "electronic shift malfunction mean" Questions

shift into reverse the car backs up with no problem. As the transmission gets warmer I try going in reverse and it is either sluggish and hesitant or it will it will not move at all. I have no problem

...shift but won't go over 60 mph The code translates as :- Fuel trim (FT), bank 2 - malfunction. this means there is a problem with the fuel to air mixture entering the engine. That will explain the ...

...MALFUNCTION. WHEN THIS CODE APPEARS THE ENGINE STARTED VECHICLE IN GEAR AND THE PCM DETECTED THE ELECTRONIC PRESSURE CONTROL EPC SOLENOID CIRCUIT INDICATED OPEN THIS FAULT CAN CAUSE HARSH ENGAGEMENTS ...

...electronic brake control module (EBCM) inhibits the Engine Traction System due to a malfunction in the Engine Traction System. The IPC receives a GMLAN message from the EBCM requesting illumination. ...

...electronic gearshift indicator. This character appears with the key in the RUN position and displays the same gear selection as shown on the selector lever floor console next to the range selector ...

malfunction which might be as a result of ; 1.A crack in the insulator wire in the brake sensors in one of the wheels. 2.The ICV(idle control valve)is dirty and needs to be clean. 3.It might also be a

shift to 3rd gear when driving.I put it on a scan tool and it tells me it has a transmission control system malfunction and gear 3 ratio is incorrect.Would that mean that the modulator needs replacing

...Malfunction The purpose of the automatic transmission is to match the engine's optimum power and torque characteristics to the driver's desired rate of acceleration and speed by auto-selecting ...

...shift from park unless the brake is pressed, there is a malfunction there, some are electronic and it may not be getting power to it especially if there are other warning lights on the dash. It would ...