car (2007 Corolla) I hear a loud squeaking noise, probably a loose belt. How do I replace it? If it is the belt, you need to buy a special tool made to relieve the pressure from the belt tensioner, As
...squeaking noise (in the front left it sounds like) when I start to turn it back to straighten it out. Also, when I have the window down and going along a building I can hear a rattling noise like ...
sound to the front left when I apply the brakes. Sometimes when braking the right front or right back has a long squeak. All brakes just have been redone. Can you help? Thanks, Louise Take it back the
Question about Toyota Corolla
...noise at low speeds? When I back out of the driveway or slow the car at low speeds without completely stopping, the brakes make a squeaking sound. Time for new pads. Rotors also. Have them
...car makes a squeak when driving and a loud sound when in reverse. This just started today, no signs previously. It only has 36000 miles. What would cause htis problem. 2009 Toyota Rav4. It was doing ...
car ran hot twice and is making a squeaking sound Not much info to go on, but: Most squeaking is from 3 sources. 1.) Water Pump Bearing. Get some water pump lubricant in there quick to avoid ruining ...
Question about Toyota Corolla
...making a squeak noise sounds like its coming from left back of supercharger. Change 1 driveline idler pulley.any help Sometimes an exhaust leak will sound like a squeak. Could be a crack in housing ...
...making a squeaking noise in the front dash on the driver's side. It squeaks when we are driving and it gets louder when we hit bumps. It sounds like something rubbing together. when its raining, ...
Question about Toyota Corolla
...Check the pads. The inner pad can wear prematurely if the caliper does not slide on the spindle. Backing plates will make a lot of noise, with or without
Question about Toyota Corolla
...making a squeaking sound at the end just at shut off. please help if you can. thanks Doesn't sound good Al. Check your engine oil level and make sure it is ok. Could have had a rod bearing seize and ...
990 questions posted
Usually answered in minutes!
1,231 Questions
1,240 Questions
1,236 Questions
819 Questions
767 Questions