...exhaust pressure backing up through the catalytic converter when I let off the gasWHAT ???? They also said their is nothing they could do to fix itso my truck is still chirping away. I checked my ...
...exhaust manifold after engine warms up. These 3.0 engines had an issue with the manifolds warping and shearing off the manifold studs particularily on the corners. To repair correctly you would need ...
Question about Peugeot Cars & Trucks
...exhaust manifold studs in Peugeot 206 1.1 cc 1999 TU1 series engine - or generally for TU series engines. I do not want to destroy the thread in the motor head or tighten loosened manifold everytime. ...
Question about Ford Cars & Trucks
exhaust manifold off. If there is some of the bolt sticking out. You'll need a torch to heat the head up, red hot around the bolt. Also a pair of needle nose vise grips to grab it with and turn it out
Question about Ford Cars & Trucks
...the exhaust manifold studs and nuts in a 2003 Ford Focus SPI SOHC. Hi Dave,here's a link to a repair guide on your exhaust manifold. GET 25 GIFT CARD FOR EVERY 100 SPENT ON ONLINE SHIP TO HOME ...
Question about Toyota Tacoma
...exhaust manifolds are cast steel not iron. Cast steel can be welded! It will still probably need to be removed to be repaired but it is an easy repair. I do recommend grinding a "V" groove where ever ...
...changed at the dealership (don't start). was told that they had to lossen the bolts on my exhaust manifolds to access the plugs and/or wires. In doing so the mechanic broke three bolt heads ...
...repair is needed to stop exhaust manifold leak and what do i need to do the at home repair It depends on the leak. First of all - see if you can see any cracks on the manifold - telltale signs would ...
...exhaust, but need the tools & if the studs are rusted or break, your in trouble That said-- NO repair shop will do a better job than you will Do some research on the internet about the problem ...
...exhaust) but not sure how to disconnect it. It looks like a threaded stud on the muffler side and a through bolt and nut on other but it will not break or loosen. almost looks as if it were welded at ...
288 questions posted
Usually answered in minutes!
352 Questions
307 Questions
394 Questions
295 Questions
304 Questions