1999 Toyota RAV4 "4 head torque" Questions

...4 engine oil cooler bolt torque setting is. thank you INSTALL OIL COOLER -clean the oil cooler contact surface on the oil cooled mounting -install a new O-ring to the oil cooler. -temporarily install ...

i need to know torque specs for rav 4 1az engine Cylinder Head stg 1 = 40NM stg 2 = 79NM stg 3 = 90^ Main bearing stg 1 = 20NM stg 2 = 40NM stg 3 = 90^ Big end bearing 25NM then 90^

...4 2 8 ' --------- Step 1: torque cylinder head bolts in sequence to 26 Ft/Lbs Step 2: torque cylinder head bolts to 56 Ft/Lbs Step 3: turn cylinder head bolts in sequence an additional 90-degrees ...

...4: Torque small bolt in rear of head to 25 Ft/Lb Recheck final torque in sequence *** CAUTION ***engine uses Torque To Yield head bolts (TTY) thatpermanently stretch during the initial ...

4 Liter engine. I am replacing the head Gaskets and need to know the proper torque specs for the cylinder head gaskets. My manuel only gives the initial settings. I have the tighting sequice, need the

HEAD BOLT TIGHTENING SEQUENCE: INTAKE SIDE 8 4 1 5 9 7 3 2 6 10 EXHAUST SIDE In sequence, torque the cylinder head bolts. Torque: 30 Nm (22 ft-lbs). In sequence, torque all bolts. Torque: 50 Nm (37 ft

...4 liter head bolts torque specs The site that has that information is called alldata and it is not free. Partstore knows Have you looked on mitsubishiforum.com? here's some info i found with a quick ...

...head bolt torque sequence Note : Torque sequence: --------- front | 3 1 6 | of | | vehicle | 5 2 4 | --------- Step 1: Lightly oil cylinder bolt threads & washers Step 2: Torque to 22 Ft/Lbs Step 3: ...

...The Head Bolt Torque Torque sequence -------------- front ' 6 1 3 7 ' of ' ' engine ' 5 2 4 8 ' -------------- Step 1: torque to 20 Ft/Lbs Step 2: torque to 47 Ft/Lbs recheck final torque in ...

...4.0? Head bolt pattern 4.0 - Jeep Cherokee Forum https://www.cherokeeforum.com > head-bolt-pattern-4-... Apr 12, 2017 - step 4...tighten all bolts except #11 to 110ft/lbs, then tighten #11 to ...