1999 Toyota Corolla "check universal joints" Questions

Universal joint, Drive shaft not fitted correctly. Wheel balance. CV joint. recheck tranz mounts also check cv joints check axle nuts also is torq converter tighten 2 the flexiplate also recheck tranz

...to let go if it is either, as it could break and drop the car to the ground. please have it

...past may have changed one or more with sealed joints you need to look to decide jack up the car remove out of P release handbrake rotate rear wheels and check the universal joints for grease

...to help you check your propeller universal joint and your rea wheel bearing. A defective propeller universal joint is very risky and if it pulls, this might cause fatal accident. I wish you the

...universal joints are bad ? The easiest way would be to take hard turns in a parking lot at slow speeds both left and right. If you hear a clicking noise and as you slowly speed up noise follows ...

check the driveshaft universal joints and the play in the yolk joints where the driveshaft exits the transmission and where it enters the differential.It could be the preliminary vibration caused

...universal joint. The way to check would be, where the "pumpkin" or rear end is, grab a hold of the shaft which points towards the front of your truck, then wiggle the shaft back and forth. There ...

universal joint is failing. One way to check is to get under the truck (engine off, brake on, chock the tires) grip the drive shaft and try to rotate back and forth, feel for odd or too much movement.

...fluid level and play in rear pinion gear. Check universal joints for play. If play is in pinion gear change rear end fluid and add a full bottle of LUCAS oil stabilizer, will quiet rear end

...universal joint is either worn and/or there is no grease in the jount. Check the joint for wear by holding one side of joint and trying to twist shaft on other side. If no apparent wear you can ...