1999 Toyota Camry "license place lights" Questions

Ad

Question about Toyota Camry

2 Answers

...place is fixed. This isn't a complete answer to this problem, but I thought others might benefit from just knowing how to replace the lights on the license plate. Just remove the 2 screws holding the ...

Ad

Question about Ford Cars & Trucks

1 Answer

...place. Install the license plate light cover retaining screws and tighten them using a screwdriver. Step 3: Check the lights. Turn on your car to check if your license plate lights are fully ...

Ad

Question about Toyota Camry

1 Answer

...The license plate lights are in the ledge above the license plate. 2 screws keep the lens cover in place. Remove the screws, and the cover comes off. Just pull the lamp out (wedge base) and

...license plate The lenses cover & the lenses housing snap in to place. There are plastic tabs on the sides of each.Directions: Remove the license plate light housing, and disconnect the 2P ...

...are the license plate socket wires.. Next is the clearance lights. The harness that goes to the fenders is a good place to look. If you know a lot od good swear words... have at it...lol Good

...License lights are turned on by the headlight switch. The back up lights are turned on when transaxle is placed in reverse gear. There is a switch on the transaxle that turns the back up lights

... Either directly above the license plate in the bumper or it will have one light on each side of the plate. You need to remove the screws /clips holding the light socket in place for access to the ...

...license plate lights not working. head lights and brake lights work.as soon as you switch lights on fuse blows there is a short somewhere.put a test light in place of the fuse. the light will glow ...

...license plate light housing glue How do I put in the replacement housing for my rear license plate light? No screws. Do I need glue? Am I missing a gasket? It is held in place with a metal spring ...

Question about Toyota Camry

3 Answers

...license plate bulb. Every car differs, but most have a tab that you push in, and it slides right out. Step 2 Remove the bulb from the socket. Sometimes it is a tight fit so you may need to use a ...

Not finding what you are looking for?
1999 Toyota Camry Logo

1,612 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1995 Toyota Camry
1995 Toyota Camry

1,828 Questions

1994 Toyota Camry
1994 Toyota Camry

1,753 Questions

1998 Toyota Camry
1998 Toyota Camry

1,565 Questions

2002 Toyota Camry
2002 Toyota Camry

1,303 Questions

1996 Toyota Camry
1996 Toyota Camry

1,134 Questions

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...