1998 Toyota Celica "install windshield wiper motor" Questions

windshield wiper motor on a 99 celica i tell you a quick solution everybody think its easy to change wiper and yes it is when you change them as often as me every day people come to where i work and i

...Install the windshield wiper motor. Place the windshield wiper motor in the dash panel. Install the three retaining bolts. Reconnect the electrical connector. Reconnect the windshield wiper mounting ...

Install windshield wiper motor and three bolts. Torque to: 62 in lbs. (7 Nm) With right side linkage closest to the windshield wiper motor, install drive link brackets to wiper motor crank arm. Torque

install; 9. Place the windshield wiper motor in position and install 3 retaining nuts. Tighten to 10-12 ft. lbs. (12-17 Nm). 10. Connect the wiper linkage to the windshield wiper motor and install the

...Install the windshield wiper mounting arm and pivot shaft and windshield wiper blade assemblies on the pivot shafts to dimension X. Dimension X is the distance between the centerline of the blade ...

...the washer hose. Install the pushpins. Install the windshield arms and nuts. Tighten to 27 Nm (20 lb-ft). Cycle and park the windshield wipers to check for correct alignment. alot are under the ...

...INSTALL a new windshield wiper/washer switch. REFER to Wiper/Washer Switch in this section. C2 CHECK CIRCUITS 56 (DB/OG), 58 (WH), 61 (YE/RD), AND 63 (RD) FOR A SHORT TO GROUND Disconnect: Windshield ...

REFER to Windshield Wiper Blade and Pivot Arm Adjustment in this section. TEST the system for normal operation. No INSTALL a new windshield wiper motor. REFER to Windshield Wiper Motor in this section

...windshield wiper motor cover. Remove the clip. Disconnect wiper transmission linkage. Remove the bolts. Remove the motor. To Install: Position the wiper motor. Install bolts. Tighten to 10 Nm (89 in. ...

windshield wiper pivot arms (17527). Remove the nuts (one each side). Remove the windshield wiper pivot arms. Remove the LH and RH cowl top vent panels. Remove the hood weatherstrip. Remove the screws