...starter relay and ignition switch. these are the remaining items in the starting system for no crank and no start. Get Shop manual and do the appropriate testing for each. Ck cable ends to start with ...
Question about Toyota Camry
...system failure) no, the jumper test failed, so what to do next, (i use meters) but A: I hot wire the solenoid, big lug to dinky lug. all keys in pocket....!@!!! it cranks great that means the starter ...
...turned to on position thought it was bad fuel pump but wasn't the short stops if I pull IGN fuse not sure how to track problem down need a meter to test ignition system switch--harness--relay ...
...system that's making fuses blow, i had the same thing happen to me check the wire that runs from the starter to the main fuse box and the wire from the battery to the fuse box. It will only be the ...
Question about Toyota Camry
...starter is turning well nothing is wrong with it when I went to check the fuses I found the 5A ign fuse blown I replaced it as I was almost to turn the keys on I heard the sound of pak then I checked ...
...starter causing you problems. If you get a crank, start by checking all of youe fuses. A fuse can cause your car not to start. Also, you should try to see if your car is getting gas to it. If your ...
...starter circuit is suspect. Step 4 Check to see if there is power to the neutral safety switch if there is no power at the relay. Use the voltmeter to check for power with the key in start. If there ...
...starter circuit is suspect. Step 4 Check to see if there is power to the neutral safety switch if there is no power at the relay. Use the voltmeter to check for power with the key in start. If there ...
1,695 questions posted
Usually answered in minutes!
1,828 Questions
1,753 Questions
1,565 Questions
1,303 Questions
1,141 Questions
