1995 Toyota 4Runner "engine belts rubbing noise" Questions

engine light came on. i had found the thick black and red wire that splits to the igniter 201 and im pretty sure the noise capacitor, aswell as the black and blue wire that goes to the ignitor 201 had

...engine start running the is a noise on timing and drive belt side Noise if it is a squeal the belts need tightening If it is rubbing or grinding type noise most probably one of the pulleys could be ...

is the noisy belt it will change or eliminate the noise.Do this for each belt shutting off the engine each time.Change all the belts even if you find just one bad one as the others won't be far behind

...engine up and then revving up to 2500-3500 rpms-there is a ratting noise coming from intake camshaft side and also rubbing or light grinding noise from distributor cap. I think the belt is off by one ...

engine is making a weird rubbing noise, could it be the belt? the belt may be rubbing against the plastic guard...look around the guard area for very small particles of rubber...if none found, then it

...belts, pour some water while the engine is idling into the belt and observe if the noise has lessened. In such case switchoff engine use some wax or chalk to rub into the belt. this may be a relief ...

engine is idiling and warm Take a candle and rub all belts, do NOT get your hands stuck between the belts BE CAREFULL or use silicone spray. Try this first, sometimes the belts dry out and make noise,

...engine is idle in the area of the alternator Chances are the belt is getting tired. Rub a bar of soap on the belt while it is running and the noise should go away temporarily. Time to change the belt ...

...noise. Sounds like from the engine. Really annoying though Sounds like your serpentine belt is dried out.Replace your belt make sure belt tensioner is ok,or you can make sure that it is your belt by ...