1995 Toyota 4Runner "drill ignition lock pin" Questions

Ad

Question about Toyota 4Runner

1 Answer

ignition cylinder on a 1997 toyota 4 runner Here's what you need: 1) Drill 2) 5/32â?² cobalt drill bit (use cobalt, it's for drilling hard metals and is necessary) 3) 10mm socket wrench Here

Ad

...ignition without the key my first suggestion would be contact your local dealer to see if they can cut a key by VIN under key code inquiry if not you will need a VERY SHARP and good quailty drill ...

Ad

...ignition I had the same problem and after reading this thread contacted an automobile lock smith. He stated that the first thing to do is get a new key made to the factory key code. The metal in the ...

...drill down the middle of the ignition key slot approximately 1 3⁄4 in. (44mm) until the lock cylinder breaks loose from its breakaway base. Remove the lock cylinder and drill shavings from ...

...drill down center of ignition lock key slot about 1 3/4" until lock cylinder breaks loose from its base. Remove retainer, washer, and lock cylinder gear from housing. Remove metal shavings from lock ...

Question about Toyota 4Runner

1 Answer

...drill down the middle of the ignition lock key slot approximately 45mm (1-3/4 inch) until the ignition lock key slot breaks loose from the steering column cover casting. Remove the ignition lock key ...

...ignition switch without a key? 1985 mercury marquis you need a steering wheel puller, take off the steering wheel, then you'll see it's obvious With a drill I'm afraid. You need the key to turn the ...

Question about Toyota 4Runner

1 Answer

...drill out the retaining clip in the ignition switch that holds the lock cylinder in place. Be care ful with the switch. The new lock will slide right in with key in start position. If it has a ...

...ignition switch on 2002 pontiac sunfire how do you do it yourself Just to add to this excellent first answer, where you have to drill is at the direct back of the plastic lock assembly on the column. ...

...ignition lock cylinder for a 2001 VW Jetta. I have a replacement cylinder and I am still able to turn the key in the existing lock. their is a pin that need to be pushed down to remove the barrel but ...

Not finding what you are looking for?
1995 Toyota 4Runner Logo

977 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...