1993 Toyota Tercel "crank shaft cam timeing marks" Questions

Timing mark on crank and cam shaft on 1993 Toyota tercel The timing marks are at 12 o'clock on the cam shaft pulley and at 6 o'clock on the crank shaft .

...crank shaft pulley first, and after on the overhead cam pulley. Release tensioner and rotate the crank shaft till the timing belt makes two full circles. Try to align marks, you will be at least one ...

crank shaft,,water pump pulley. and the cam shaft marks up and recheck the origninal marks I made to save time....one of the cam shafts had slipped enough to cause it to be "off time" and the computer

...Crank shaft to Cam shafts and the firing order You want to align the Crank and Cam gears timing mark with the corresponding mark on the engine itself.Camshaft Mark ---Crankshaft Marks.Here ...

shaft and crank shaft with center of cam & crank shafts and the ECM will go from there. so you will have to change the timing chain if its loose or worn out. OKAY, THIS CAR TIMING CAN'T BE CHANGED

...crank shaft for TDC? Do I need to pull a spark plug to find TDC of #1 cylinder. You must find the cam lock bar and crank lock pin to do this job properly, otherwise you can bend some valves and that ...

...crank shaft and oil pump pulley. You can get the timing mark diagrams from a chiltons book or off of Mitchell online. The only problem with mitchell is you have to subscribe to it. The timing cover ...

Crank shaft gear is not keyed to the crank shaft. there are dots on the right hand balancer shaft gears and these dots will be as the 2 dots on adjacent teeth either side of a dot on the meshing gear.

...crank shaft gear to TDC on the timing marks OR you have both marks on the gears and you line them up with each other using a straight edge through the center of the shafts, then you put the chain

...crank shaft. you have to loose off all the rockers/ cam followers even to the point of removing the cam shaft. having done that remove no1 cylinder spark plug and by the use of a thin piece of wire ...