...a 91 Toyota pickup 4X4 that isn't getting any spark at the coil. Already have replace coil, ignitor, distributor, wires, cap, rotor and fuel pump. What else should I check ? Check your fuel ...
the connection between the clutch and the ignitor Hi, I have a 1991 Toyota 2-wd truck. Basic. A few months ago I was driving home, on the last leg of my 4-hour trip. I was heading south on 95, coming ...
...driving. Tested - no spark from output of coil to distributor. Do have voltage in connector to ignitor. Replace your ignitor and module that will fix your
how can u test the ignitor take out a spark plug and ground it against the engine or head.crank the engine and watch the end of the plug.if you have spark the igniter and the coil is good
HOW TO CHECK IGNITOR ON 1993 TOYOTA PICK UP 3.0 L http://www.ncttora.com/fsm/1993/index.html
...out i cant get no power to the fuel pump but when its warm it works great we thought it was the ignitor we replaced it with one from a junkyard but it still does the same thing. did we get a bad ...
...If there is no spark then the coil is the likely problem. If there is spark then check that the ignitor is recieving the signal from the pick-up (use an LED tester at the ignitor plug) the tester ...
...in the distributor and they check out fine. With the key on I have 12 volts at the input to the ignitor. I replaced the ignitor with a known good one and it still won't start. How can I check the ...
...IS GETTING GAS TO IT.WHAT SHOULD I TRY NOW.THANKS FOR ANY INPUT. will try to help.try checking the ignitor assesmbly,with out it your truck will not get fire or low fire,so low you won't catch it. ...
ignitor receives no distributor signal no spark...coil tests good, distributor tests good, ignitor good, no distributor signal at ignitor wiring How are you doing this testing? You need wiring ...
626 questions posted
Usually answered in minutes!
914 Questions
745 Questions
525 Questions
407 Questions
140 Questions
