1993 Toyota Pickup "adjust torsion bar front suspension" Questions

torsion bars. They have been known to snap. Get under the truck and look for the long bars going from the front suspension to under the cab. Look for any looseness, or clean metal, which would suggest

...torsion bar suspension. This is why you don't see any springs. Depending on the amount of drop you are talking about, there is some degree of adjustment to correct ride height. If you look under the ...

torsion bar suspension then lift vehicle and block it up the remove the end off the torsion bar and move it around a spline or two but you may just need new torsion bars as it is 19yrs old so its sell

...torsion bar suspension in the front. Can I lower the front by adjusting the cam on the end of the torsion bar? Will I need to replace the spring hangers on the rear axle? If you lower the front by ...

torsion bar adjustment bolts on the lower control arm of the front suspension. Use a wrench to loosen the adjustment bolts on both sides of the truck. You may need to spray some penetrating oil on the

...torsion bars are not equal, so a set amount of turns to adjust is not a fix all solution. Mine is 10-1/2 turns from first thread contact, but, you need about a 1/2 inch of clearance from lower arm to ...

...truck never stopped going down. it looks like a lowerd my truck. what do i have to adjust to get it back to the stock height? you need to adjust your torsion bars when it is off the front

...in an IFS (indapendant front suspension) all ifs 4x4 trucks run torsion bars, easier to adjust ride height, but a little harder to put a lift kit, as apposed to the solid front axle with

...the driver side sat about an inch higher than the passengerside. the compressor is working what could it be? There are torsion bars in the front suspension, the ride height is adjustable with

...torsion bar. The rear end of the torsion bar mounts on an adjustable arm at the crossmember. This arm adjustment controls the vehicle trim height. Two-wheel drive vehicles have tapered roller sheel ...