1993 Toyota Camry V6 "cam belt" Questions

...cam belt that must be replaced every 60,000 miles. The cam belt also drives the water pump and for this reason I recommend you replace the cam belt at 120,000 miles when you replace the cam belt the ...

...second there is a yellow factory mark on only 1 cam and thats cause only 1 cam is driven by the belt the exhaust cam is gear driven off of the intake cam under the valve cover not even near the ...

cambelt/ timing belt A cam belt is sometimes call a timing belt. It has a cam belt that must be replaced every 60,000 miles.

...cam shaft is turning (broken timing belt/chain) Suspect "jumped" timing belt,if the belt were broken you would have no spark as the distributor is driven by the camshaft, valve to piston collision is ...

...belt over Cam sprocket tighten tensioner. Install cover and mount (if applicable) Check timing marks by turning crank two revolutions. ** If CamSprocket Bolt is difficult to remove then remove valve ...

...belt on, crank mark on the crank mark, cam marks on the cam marks, don't line up? It should, If the engine hits the valves, you will have to turn the cams at the same time by hand so they don't hit, ...

...cam. need timing belt route as long as the the hole in the cam sproket is facing straight up and the crank on 0 youre timing should be good there are marks on the back plate for the cam sprocket its ...

...cam belt. The procedure to replace the belt and water pump is far too complicated to try and explain on this forum. You need photos and detailed instruction. If you wish to tackle this yourself I ...

...cam belt broke, thus saving the valves. I do not think that your vehicle had the feature. However, if you gave more info0, ie, is the car running or not, then there might be an easy way to check the ...

...Crank/cam misaligned timing can be due to a slack timing belt jumping a tooth on a cog. Check that the belt is tight and that the timing marks on belt align with the cam and crank pulley timing