1992 Toyota Pickup "valve cover" Questions

...valve cover gaskets on a 1994 nissan 4 wheel drive pickup. its a v-6 3.0 theres couple bolts on the valve cover prbly 10 take them off then pull valve cover then new new valve cover gasket on make ...

...valve cover. The valve cover (or cylinder head cover) is the domed steel item with the oil filler in it. Remove the small nuts holding the valve cover, then lift the cover off. Retrieve the rubber ...

...valve cover on 1996 Nissan Pickup Bolt torque specs for valve cover None of these answers make sense lol it clearly says at the top valve cover gasket bolts. Where are these crazy answers coming

my pick up motor 22r 1990 run good but leak oil thru the top of the valve cover,and reelease same presure thru the little pipe on top of the valve cover. change the pcv valve

...valve cover gasket In addition to the acorn nuts holding the cover down ... you'll need to remove any hoses, etc that prevent you from lifting the cover. You might as well do the PCV valve while ...

...valve cover my 1990 toyota with a 22re 4speed has vacuum pressure in the valve cover.While the engine is running and you remove the oilcap, the engine will stumble and almost die.You can feel the cap ...

...cover off and reset valve clearances.If you havnt done this before a mechanic is your best bet or some body you trust who knows what to do as getting it wrong is not an option.Sorry didnt answer ...

torque for the valve cover for a 1992 pick up 22 RE torque for the valve cover for a 1992 pick up tighten 5 to 6 ft. lbs on torque wrench, tighten evenly and do not overtighten.

...never changed this myself,so I don't know where it goes PCV are generally located on one of the 2 valve covers if you have the replacement part look for it on the valve

...the valve cover it died, has no power, and now it's knocking in the valve cover hows the oil preasure. sounds like you have a bad lifter or lack of oil try adding some lucas oil stabilizer to the ...