1992 Toyota Pickup "speedometer needle removal" Questions

...Speedometer cable on my Toyota Truck (1989-130 000miles ) making noise and the needle is going back & forth You need to remove the cable from inside its housing and put some grease on it. can't ...

...speedometer\r\nstill twitches until about fourty miles per hour. I do know after it stops twitching, it is very acurate. How can I stop the needle from twitching? It is a 1991 Isuzu Pick up, with a ...

...speedometer. It sounds like the cable needs lubed. Is there a way to do this without pulling the dash apart? Is there a grease fitting somewhere by chance? Thanks for any help. You will have to make ...

...speedometer isn't. Every now and then it will jump up, freeze and then come back down while driving. Or it will do nothing. Any Suggestions? Replace instrument cluster. The speedo cable could be lose ...

speedometer.3Secure your car in a safe position before jacking up the front end.4Stabilize the engine with a jack below the oil pan. Remove the transaxle by undoing at least one engine mount.5Separate

speedometer needle is behind pin, in a 2001 chrysler town and country. instead of buying part what else can i try? This is an ez repair. Remove the trim around the dash of the speedometer. Unscrew and

speedometer needle that's trapped behind the stop post u don't rest it, u must remove the speedo and send it out for repair, there is a reason why the needle did this, the electronics have failed that

...speedometer needle stuck below pin I changed battery, now my speedometer needle is stuck below the pin. All other gauges work and cruise control works. I have found methods to reset this with other ...

Speedometer needle removal This is the trickiest part of the job. The needle is pressed onto a shaft that is extremely thin. It feels like a pretty tough metal, but you HAVE to be careful here. Do not

...speedometer needle bounce The needle bounce may be related to the cable, it may be broken or just needs lube.Remove the speedometer cable, locate the connection at the transmission and unscrew it, ...