1992 Toyota Pickup "line timing marks 2" Questions

need timing marks on 2.4 1995 nissan 2 wheel drive pickup how do you line up the timing marks on 95 2.4 nissan pickup Here's a link to the timing marks.

...timing chain tensioner had gotten starved for oil and allowed enouph slack in the chain to allow it to jump 2 teeth. Tall tale sign-look on the underside of the valve cover for scrap marks where the ...

...line up the timing mark on the crankshaft pulley to the pointer on the belt cover the zero mark is the farthest one to the left when facing the front of the engine.if i'm right the color is

...line brackets from the upper timing cover and move the pump out of the work area without disconnecting the hydraulic lines. Disconnect and remove the starter motor if a flywheel holder (part No. ...

...the timing gear no --- the revolutions of the cam shaft is set to half the numbers of the crank shaft so that means that you will have to turn the crank 2 full turns to get the links to line up ...

...timing chain was just changed a couple of years ago. There is also a noise coming from the front of the motor(knocking noise). I'm thinking about pulling the sprocket off and lining it back up. What ...

...line up the cam shaft and gear wheel. I then fitted the timeing chain and rechecked the alignment. Tried it a tooth forward and checked, a tooth back and checked. Eventually when I was satisfied I ...

...2. With the head in place, install the head bolts. You will need to tighten the head bolts in a circular pattern starting from the center and working your way out. I recommend hand tightening all the ...

...line attaches.This is located on the front (assuming 2.4 4 cyl.) of the carb. Disconnect the battery negative cable. Remove the air cleaner and take careful note of the vacuum lines connected to the ...

...timing on a japanese mini truck mitsubishi engine Some mitsubishis were marked with 2 marks, one on the head and 2 on the pulley, whichever is on the head, either a diamond or a square, will line up ...