...under the hood. If tapping the light there made it come back on, then you have have a more serious issue with either the bult or wiring. Open the hood and wiggle the wire harness where it connects to ...
...under the hood on the left fender well in relay block #2. Hope this helps.Do you have DRL (daytime running lights) on your Toyota? This makes a big difference on the wiring diagram. Please advise.OK, ...
...the E1 and TE1 terminals on the diagnostic connector under the dash or under the hood near the passenger side strut tower. Check the link: How to Retrieve OBD Trouble Codes 1992 1995 2 2L ...
...Under your hood there should be a diagram of your emmision system.. Check all lines and elect connections for cracks and bad wires. Does your engine light come on? Most auto parts stores will check ...
...found in the fuse box under the hood. Unfortunately if the fuses are fine you may have bumped a wire while cleaning the rear window and it will need soldered back on. Please rate this answer,
...under the hood that has bolts in the sides of it to connect the wires. have him check the wiring to the alternator and the alternator itself. the big boy that blew is for the alternator on the small ...
...pump first then you will know you need a pump first, check or replace the fuel pump relay, the relay located under the hood in the fuse and relay box. Same as main relay in that model ck wire ...
under the hood, see following diagram) Use two short wires, one wire at terminal TC and a different wire at terminal AB With the ignition key ON - wait 6 seconds, then: Ground terminal TC to good body
Question about Toyota Camry
...under hood fuses. What engine - 2.4 or 3.5 L ? It's probably the EFI relay , but without testing this is just a guess . To find a problem like this you need to view electrical distribuition diagrams ...
823 questions posted
Usually answered in minutes!
1,828 Questions
1,753 Questions
1,565 Questions
1,303 Questions
1,134 Questions
