1992 Toyota 4Runner "swivel bar" Questions

Ad

bar and push against the tensioner is easier but be careful if it slips . ouch also some breaker bars with swivel ( I use craftsman small breaker,it's thin and will just fit) will just fit down in and

Ad

bar as well this will help .If it has them big alloys on then will make it heavy as well ,although i wouldnt mind betting that the swivel joints are worn inside causing the heavy steering ,also inside

Ad

...swivel take a long bar and have some one stick it between the swivel and the a frame and press down this will loosen the swivel and the assembly should be loose now hold on to the assembly and have ...

bar and make a slight dent in the body just above the bolt.This is the one on the drivers side.Then use a swivel socket to remove the bolt.Not a socket on a universal joint but a swivel socket.It is a

Question about Toyota 4Runner

2 Answers

...want the drive tires off the ground if you want the least amount of grief. *** Make sure your dolly swivels or you will be sorry. a tow dolly is better --with a tow bar need to bolt on connections to ...

Question about Toyota 4Runner

1 Answer

...There not easy but they can be done. A swivel spark plug socket will make it a little easier and if yours has the strut bar between the two strut tomes remove it. It will give you a little more

...swivel ratchet you could remove the front support it look like a dog bone. there is a hole under. with a bar trans in neutral move engine toward you and secure the bone. you will have plenty of room ...

Question about Toyota 4Runner

1 Answer

...of it. Two 15mm bolts hold the start in place, but you will need to use a swivel socket to get on the front one, otherwise the bar will prevent its removal. Good Luck, and thanks for using

Question about Toyota 4Runner

1 Answer

...swivel and some extensions, as well as a breaker bar. twist it in the CounterClockWise direction. After you have the transmission removed, clean the threads up with a tap and replace the 14mm bolt ...

Question about Toyota 4Runner

1 Answer

...air-impact gun available, you can use an impact socket attached to a one piece breaker bar (no swivel or flex head ones...they will snap) with a five foot black pipe slipped over it for more

Not finding what you are looking for?
1992 Toyota 4Runner Logo

506 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...