1991 Toyota Tercel "checks clutch fluid" Questions

Ad

Question about Toyota Tercel

1 Answer

clutch fluid resevoir is full, if not, fill it with the proper fluid and see if you can bleed the air out of the system. if it is full then you probably will need to replace the clutch master cylinder

Ad

clutch fluid? Reservoir should be on the firewall near the brake M/C. Look for a little cup like in pic below with a tube coming out the bottom. That tube goes to your clutch M/C as you can see in the

Ad

...clutch master cylinder. If fluid is full likely that is your problem. If fluid is low, check system for leaks and replace anything that is leaking, then bleed air as you would with a brake system. ...

...clutch fluid or something? the problem may be a faulty clutch master cylinder that has a blocked compensating port I would suggest taking the vehicle in for an inspection of the hydraulics or the ...

Question about Toyota Tercel

1 Answer

...if still not right do it again. make sure the brake fluid is up at same time as it uses this for the clutch. can take a few times after the clutch has been changed. they don't fix by them

Question about Toyota Tercel

3 Answers

...but it sounds like the clutch is gone. Check the clutch fluid to see if it's low. If the level is good, you may have a different issue with the clutch but I wouldn't assume its the transmission. ...

...fluid in you clutch master cylinder.. these are known to go bad/.. hope ya get it going with my help .. jay the motor repair guy in longwood fl Sounds like you have lost a synchronizer  and the ...

clutch and put the car in gear 1,2,3,4, or r; it will not move. I'm thinking the transmission is shot. But I had no early indication of a tranny problem. Is it possible for the tranny to go witout any

clutch fluid level ,you will need to replace the clutch master and slave cylinder, the trans will have to come out. I assume you are talking about your clutch pedal? Sounds like the fluid reservoir in

...AROUND LINES TO CLUTCH MASTER CYLINDER AND CLUTCH SLAVE CYLINDER.IF FLUID LEVEL ALL GOOD. LOOK FOR A BROKE CLUTCH RELEASE BEARING OR FORK.CHECK FOR BROKEN DIAPHRAGM SPRING IN CLUTCH PRESSURE

Not finding what you are looking for?
1991 Toyota Tercel Logo

173 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...