1991 Toyota MR2 "replace foot brake release cable" Questions

Ad

Question about Toyota MR2

3 Answers

...foot break is great.can the cable be adjusted n if so where fron.thanx lads. The last comment is a but wrong. Let me explain why: The pistions on the rear is ALL MR2s are not the push in type...You ...

Ad

...foot pedal. ..... Then I released the parking brake, pulled out the broken release cable/handle assembly, ... How To Install Repair Replace Parking Brake Release ... ? 5:54 ...

Ad

...brake would not release. I need Help! Try pushing it down with your foot again and pulling up on the release at the same time. This should release it. Also try backing up while you pull the release. ...

Question about Toyota MR2

2 Answers

...cable while you depress and release the foot pedal. don't do this until the cables have set all night with the spray on them. Good Luck! Thanks, Dana You may need to replace the rear shoes or

...are rusted they have to be replaced. try this tip , with the engine running and your right foot on the brake pedal , tap the hand brake pedal with quick jab of the left foot , this may release it

...foot pedal has returned to its off position. Lube with WD-40 all connection areas of the parking brake cable especially where it enters cable shielding. Remove rear tires, beat all around outside of ...

...Foot brake pedal wont release Sometimes lubing the cable around any braces and connections then letting it soak in can loosen a ceased cable. A product such as WD40 has a good penetration value for ...

...brake stuck in the on (down) position. How do I release it? Is it electrically released when you put it in gear? Thank you Try pushing it down with your foot again & pulling up on the release at ...

...the parking brake locked. how do i unlock it? If the handle/ foot pedal releases, then it is the cables to the rear brakes that are frozen. You can replace them or cut them close to the rear

Question about Toyota MR2

2 Answers

foot pedal emergency brake try pulling the release and lifting up on the pedal. If you have a consul emergency brake push the release button and push it down. If the light goes out then the problem is

Not finding what you are looking for?
1991 Toyota MR2 Logo

302 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...