1991 Toyota Corolla "loose swivel" Questions

Ad

...swivel 14mm socked, you have to work this bettwen axle and eng block trougth pass wheel access.(remove tire). remove bolt unplug wires froms starter, now go to drivers side and look for the second ...

Ad

...loose belt, simply adjust the tension, which is typically done by adjusting the alternator, and occasionally, another swivel mounted type component such as a compressor, or power steering pump. It's ...

Ad

...pulley against the belt. You will need to get a smaller belt or replace the tensioner if the belt is "too loose" after you swivel it back into the tight position against the belt and release

...loose, swivel the pulley side way. Mostly, you don't have to remove the bolts & or nuts completely. You may need to remove other serpentine belt to reach the power steering belt. Removing those ...

Question about Toyota Corolla

1 Answer

swivel to get loose then use the hose to slide on the plug and remove it by hand the rest of the way, to install you will dothe same, use a small peice of hose, slide onto the plug and tighten by hand

...loose in the swivel mount, it is a powered mirror. How do I tighten it up? It is a 2000 Dodge Grand Caravan look under the covers and their is either a screw or a bolt that will tighten the spring ...

Question about Toyota Corolla

1 Answer

loose and swivel. now, if the car is supported with stands sufficiently and jacked up high enough you should be able to squat somewhat into the wheel well and grab the alternator with both hands. have

...loose and let the motor trans tilt all the way till it stops. I use a 36" extension with a craftsman 14mm swivel socket (much better than a swivel and separate socket). the driver side, i believe 2nd ...

...three inverted torques screws in the column that come loose you have to pull the steering wheel pull the swivel pins tighten the little screws. it not hard to do . it is dangerous to drive like

...more leverage to break it loose, or from underneath, using a very long extension and a 14mm swivel socket, I would wrap some electrical tape around the swivel socket to keep it from flopping

Not finding what you are looking for?
1991 Toyota Corolla Logo

711 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1998 Toyota Corolla
1998 Toyota Corolla

1,231 Questions

2003 Toyota Corolla
2003 Toyota Corolla

1,240 Questions

2005 Toyota Corolla
2005 Toyota Corolla

1,236 Questions

1994 Toyota Corolla
1994 Toyota Corolla

819 Questions

1996 Toyota Corolla
1996 Toyota Corolla

767 Questions

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...