1990 Toyota Celica "distributor" Questions

want to remove and replace the distributor in my 1997 gmc 1 Remove the plastic cover from the engine block with a wrench, then let the spark plug wires lead you to the distributor. It's at the ...

want to remove and replace the distributor, how is I have a1986 toyota seca and oil is leaking from the distributor,we want to remove and replace the distributor,and how is it timed? This sounds like ...

...at acceleration but goes away with more than 1/3 throttle depressed The 5sfe is notorious for distributor problems. You'll get correct resistance readings on the primary and secondary coils,

...Celica GT. The engine died while I was driving. It will crank over but won't start. Remove the distributor cap and see if you see a rust colored dust inside. If so, the the distributor is bad

...then I got 5 meters out of drive way and it completely stop I towed it back to home and removed the distributor cap, the router button was in pieces so I got a completely new router button and ...

whats the timing sequense for celica st 1.6 I assume you are trying to set up the distributor? 1-3-4-2, be sure to set the cylinder 1 to Top dead Center when the shaft of the distributor is aligned in

im not getting any spark put a new distributor in the car still wont start no spark What was the problem that caused you to fit the distributor? If it was an attempt to fix the problem that you still ...

...one night fine and the next morning will crank but wont fire up no spark to plugs, got power TO the distributor and to the ignite does the power usually come from the in-source and out the other plug ...

distributor not turning Is it locked up or not turning when you try to start the car? Pull the distributor out and make sure the shaft isn't sheered off or the teeth aren't broken. You may ...

...All fuses are good, new spark plugs and wires, what could be the problem? PROBLEM COULD BE IN THE DISTRIBUTOR OR IGNITION TIMING OFF. COULD BE THE IGNITOR ON THE FIREWALL OR ECM BEHIND