check engine light blinks light blink when i give it gas and engine hesitates when shifting. ( automatic trans.) The reason for hesitation of vehicle when accelerating is due to lack of transmission ...
My engine cuts out while driving? My engine randomly cuts out while driving, I think it is immobiliser related. the IMMO lamp dont lie, why not watch it. , yous said think but dont know your dash ...
Question about Toyota 4Runner
How do I see/get error codes for my 1988 4Runner? (Idling prob.) How do I see/get error codes for my 1988 4Runner? (idling prob.) The check connector is located near the No. 2 relay box. Short ...
...light is on. Got a code of 6 blinking lights. Took it to the mech. replace the dist.,coil, and cpu. Then rec'd a 21 code. I replaced the o2 senser. The check engine light was still on but it was ...
Question about Toyota 4Runner
92 toyota 4runner speedometer inoperable and check engine light comes on speedometer, odometer, trip odometer not working and the check engine light illuminates sporadically so why not scan it first ...
...light on (blinking, at times), sometimes when I step on the brake it brakes quickly rather than to a slow stop The first thing I would do is to go and get the service light checked out. You can go up ...
...light is blinking (such as missing, popping, etc--I have changed plugs, wires and one time we got a code for a misfire on 2 and 5, so I changed the coil pack on # 5 cyl which also fires #2--but the ...
Question about Toyota 4Runner
...will be blinking. If the light is not blinking, check the ground wire from injector to computer. If the wiring is good, possible computer failure-it is not internally grounding the injector
what is the e1 and te1 terminal These are terminals in the diagnostic check connector usually located under the hood on pre 1995 models using the OBD1 diagnostic system, when a jumper wire is put in ...
...blinking engine light, will be a strong indication of a severe miss in one or all of the cylinders located on the engine. In order to located the effected cylinder(s), you will need to run the ...
570 questions posted
Usually answered in minutes!
676 Questions
430 Questions
361 Questions
348 Questions
361 Questions