1989 Toyota Pickup SR5 "valve adjust 2" Questions

...the engine 1 revolution and line up TDC again, now adjust #4 int and exh, #3 intake #2 exh. now you are done. Be sure to replace the valve cover gasket and any rubber pieces at the ends of the

...valve cover of a truck I want to buy. Also How do I find out if the one time free head gasket job has been done? lastly, is it true that toyota replaced the beds because of the rusting issue? Thanks ...

...adjust the rocker arm bolts for the valve lash on a 1985 Nissan 720 pick up Z24 engine what is the valve lash adjustment to the rocker arm bolts on a 1985 Nissan 720 pick up, 2.4 liter Z24 engine, 2 ...

...valve tick is nothing. I own 2 nissan 240sx, they have the same motor as your truck. i have a good amount of experience with them. hope that helps but to be safe if you have a feeler gage and the ...

...valve. To adjust, loosen the locknut on the end of the rocker arm and turn the adjusting screw until the clearance is correct. Tighten the locknut and recheck the clearance; there should be a slight ...

2. this sounds to me like you are losing power due to your valves being out of adjustment, valve lash adjustment should be checked at every tune up on this motor 3. a manual on this vehicle would be a

...are reeds inside the horn and when you adjust the screw out it lets it vibrate easier. The get rusty over time and the cool temperatures makes the reed valve shrink when cool causing it not to

valve screw came out 1989 toyota pickup I have a 1989 toyota pickup. The IACV screw came out. WHat can I do to fix this? If you have the screw and the little spring around it just screw it back in. If

...slight adjustment with cap with no improvement. what do i try next? You might try replacing the valves that probably got bent when the engine was started with the cam timing being

...2-wheel drive manual transmission, standard cab & standard bed. Can you please suggest what I can do? That will be the load compensating valve.It will have some sort of rod connecting it from the ...