1987 Toyota 4Runner "remove dashboard" Questions

Ad

Question about Toyota 4Runner

1 Answer

...dashboard, instrament pannel and stereo mount to remove disfunctional heater core, but I am unable to get it past the AC unit. The Chiltons book pictures show the AC not in the way for removal. How ...

Ad

Question about Toyota 4Runner

1 Answer

...remove the right side of the dashboard? It seams to be free in the front and a mysterious connection in the back, near the windscreen. The solution eludes me. I know this post is a bit older, but... ...

Ad

...follow cable to firewall and disconnect cable from fire wall a rubber grommet may need to be removed with a flat blade screwdriver and gentle pressure. under dashboard, at top of gas ...

...remove and replace blown bulbs. Reverse procedure to reinstall speedo. A magnetic phillips head screwdriver is handy to get the screws back in without loosing them into the back of the

Question about Toyota 4Runner

1 Answer

at the dealer, an indipendant shop probably won't know how to remove the delicate dashboard pieces and they're not cheap to replace. The truck is only 4 years old, they might be covered under warentee

...to get the part out of dash-front. was the control panel ever wet? You may need to remove the entire dashboard to get the part out - I am not that familiar with 4 runners so I could be entirely ...

...Remove the three or four bolts holding the heater case to the dash. Because the inlet tubes project through the firewall, the unit will not fall straight down. It will need to be pulled into the ...

Question about Toyota 4Runner

1 Answer

...dashboard light 1997 4runner sr5 light is burned out for the heater control.How do I replace the light? pull the knobs off of the switch, start in the lower right hand corner and gently pry with a ...

Question about Toyota 4Runner

3 Answers

dashboard and connecting it to the back of the cluster is a project. Look closely at the new one before you use a sawzall to remove the old one, they were made to pop on quickly on an assembly line so

...dashboard, you need to remove battery cable from (-) terminal.removal of dashboards differ from car model to car model. basically there are upper screws and you need to remove dash board bezel/trims ...

Not finding what you are looking for?
Cars & Trucks Logo

166 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...