1986 Toyota Land Cruiser "4wd engage motor 4" Questions

...4wd shifter is manually engaged on floorboard. Front wheels will not engage no matter if it's in 4 high or 4 low,but trans does gear down. Can anybody help?? You have vacumn lines the run to your ...

...engage into the hubs need to know how it works make sure your 4WD switch is working.and fuse is okay.because your 4WD is control by 4 electric shift motors in which drive a rotary cam which moves the ...

...4wd hi engage button nothing happens. The first time this happened the 4wd light flashed and buzzed then turned off. when i shift manually into 4wlo it does engage that and i've tested it in the sand ...

4wd will not engage Before changing the actuator check the vacuum lines at the vacuum switch on the left side of the transer case if they are wet with transmission fluid the the switch is bad and that

...engage. What should I check? i have not attempted anything yet have been attempting to gather information i am hoping its just a relay There is a 4wd actuator mounted to the transfer case. Have the ...

...4wd wont engage have shifter on floor light wont come on or 4wd wont engage Any time your dealing with a 4x4 system the best start is at you front axle. Its primarily a vacuum leak so check to see if ...

...engage the 4wd.the plunger should slowly come out.if it doesn't then the actuator.common problem.if the switch doesn't light up the it may be a encoder motor problem.check the 4wd fuse before

...4WD to 2WD ). Lift and support the front of the truck so the front wheels are off the ground ( take safety precautions, chock wheels, jack stands, etc ) Key on, engage 4x4 and try to turn the front ...

engage in 4H. But, even after trying to go back to normal driving the light continues to flash. When the transfer case is not engaged for extended periods of time, the motor inside for the 4WD sticks.

...engage T case with 4 Auto on it works. Pushed 2WD and it flashed and engaged to 4 LO. 4 Auto pressed got it out of LO but will not get back to 2WD, Also 4HI doesn't do anything. Changed back ...