1986 Toyota 4Runner "crankshaft sensor" Questions

...crankshaft position sensor harness. Fig. 1: Exploded view of the crankshaft position sensor mounting Remove the bolt retaining the sensor to the vehicle. To install, attach the sensor to the vehicle, ...

...causesDamaged PCM. Damaged CKP sensor. (crankshaft position sensor)Damaged CMP sensor. (camshaft position sensor)Base engine concerns. Wiring Harness Concerns. I Change my engine but wont ...

light because I suspect either the crankshaft or camshaft position sensor is bad (or is unplugged). There is also the possibility that the ignition switch is partially bad (no dash lights of any kind)

...fuel pump,coil and ignighter,mass air flow,computer,relays and still wont crank does not have crankshaft sensor? could it be the timing chain??? it could be yes easily already checked and changed ...

1998 4runner,cel on/off and still chugs after plugs,wires,coils,maf cleaning etc. what to check next injectors and crankshaft position sensor

...engine shaking. what next? try a new crankshaft sensor not hard to change 2 bolts and a wire It could be that you have a plugged injector. I have a 2000 4Runner 4 cyclinder 2.7 misfires at idle

...problem is probably not a tired engine, but possibly a sketchy sensor (crankshaft or camshaft position), engine computer, or spark controller. Not so expensive to replace, but no fun to

...in crankshaft position and v v t i sensor signal.... chances are you're timing is worn out and will need to be replaced. sorry to say but this job is not for the diy (do it yourselfer) and again ...

...crankshaft position sensor and the ignition coil, when the crankshaft position sensor failure will lead to the engine ignition time too early or too late, when the high voltage ignition coil fault is ...

wont crank at all replaced fuel pump,coil and igniter,plugs and wires,computer,mass air flow and it did not do nothing what about the cam and crankshaft sensors?