1985 Toyota Cressida "hood release cable repair places" Questions

...hood will jump up. Now you can use the hand to open . Use a good light to see the spot but it will be better if you can jack up the car to get a better view. As you are familiar with the position of ...

Hood Release and Hood Lock I have a 2007 Nissan Sentra. This past weekend I went to open my hood to jump a friends car. Afterward when I tried to close my hood it would only lock into the first latch ...

...hood release Hood release cable needs to be replaced Take it to a Saturn dealer with a service department and they will repair or replace it for you. I recently replaced my hood latch release cable ...

release latch wont allow hood to close completely i live in northern minnesota its been below zero for 3 days, i finally got hood to open to find head bolt heater cord out, nowthe inside latch wont go

...hood latch. Can you even see it at all? It would be a really good idea to go to a salvage yard or a junk yard and find a car you could learn from. Can you see a way to use a screwdriver or something ...

...hood manually. Remove the negative battery cable end from the negative battery terminal using the battery wrench. Make sure to put the cable end in a place where it cannot accidentally contact the ...

...hood have someone with the engine off and emergency brake pulled making sure it does not roll. Step1) Place car in N neutral and release brake to make sure it does not roll. If it does place a chock ...

...release clip, pull the access panel and replcae filter. Clean out all the junk you will find in there. I'm not positive what you mean by "cabin filter" however, I believe that you might be referring ...

release the sprockets from the tapered ends of the camshafts. Loosen the tensioner roller and remove the drive belt. To install : Install the timing belt over the sprockets, then the idler rollers and

...release tools are under the hood..It is a long skinny rod ...You have to use rod or rod kit to stick through the rear bumper at the slot and turn the rod counterclockwise after you feel the rod ...