1987 Toyota Corolla 2 Door "leaking clutch fluid" Questions

...clutch movement ( called the slave cylinder ) is leaking you my see guild under the car or dripping from the area of the clutch. Check your clutch fluid resevor and see if it's low. If it is fill it ...

want to know the part name where the leak is If it's leaking from the top down. The clutch master cylinder is leaking. If it leaking from the bottom at the clutch lever, it's the clutch slave cylinder

...clutch fluid, air is compressible. Upon stepping again on the clutch, the fluid does its work and pushed on the slave to push on the clutch fork and disengage the clutch. If air is present in the ...

...clutch fluid reservoir has needed to be refilled several times. Sounds like you are loosing fluid because of a leaking slave cylinder or slave master cylinder. Air is probably entering the system ...

clutch is leaking LEAKING WHAT....THERE IS A COUPLE OF THINGS IT COULD BE ..IF IT LOOKS LIKE OIL IS COMING OUT OF THE TRANSMISSION WHERE THE CLUTCH IS..THEN MORE THAN LIKELY ITSA REAR MAIN SEAL ...

...clutch fluid. If the fluid seemed to drop check for leaks in the side of the transmission and up in the pedal. If here is, the culprit is the clutch master. If there is non, have the clutch and the ...

...leaking fluid from the clutch master cylinder then you have air in the system. You could try and bleed the air out of the clutch slave cylinder to get the gears but it would not last. The only way is ...

...Clutch fluid reservoir empty. Filled reservoir with brake fluid, started engine. Forks on transmission move in and out, but with engine running car won't shift into gear. Did you bleed the air out of ...

...because you are out of fluid. Next you need to find where the fluid is going. Likely the clutch slave cylinder is leaking and needs replaced. Pretty easy actually if you are handy with a

For some reason when i press the cluth pedal some fluid starts leaking. If it is leaking fluid inside the car, It sounds like to me you have a leaking clutch master cyl, if so replace and bleed system