pulley and Crankshaft pulley alignment? TDC is top dead center/ remove spark plug on cylinder no. 1/ rotate the crankshaft pulley using a socket wrench and power handle and check if the piston on your
...pulley but not on block or head rule of thumb on most applications the keyway on the cam and crankshaft is at the 12o'clock position for top dead center It depends on the engine. The cam pulley has a ...
...crankshaft pulley(harmonic balancer)and can be seen with a light either forward or rearward of the top of the pulley.the mark on the pulley is usually just a slot(groove) cut into the pulley that you ...
how do i set timing on timing belt replacement Line up the cam shaft pulley mark with the mark on the head. Bring the crankshaft pulley timing mark to 0 and put the belt on.
Question about Toyota Corolla
...crankshaft pulley with the "0" mark on the timing belt lower cover. With the crankshaft pulley being aligned with the 0 mark on the timing belt cover, the hole on the camshaft sprocket should exactly ...
...crankshaft pulley keyway at 12 oclock. You can verify this by checking the notch on the crank pulley to the '0' mark on the plastic cover. Next : CAM sprocket has a letter "E" on it with a ...
...crankshaft pulley and the cover just behind it. The area may need a good wipe-down and a strong light to see the marks - they are there. If you like. locate #1 plug lead and mark the position. Remove ...
...a good set of metric sockets and end wrenches, and it looks like you will need a jack (for raising/supporting the engine while removing the mount) and a pulley puller to remove the crankshaft
crankshaft pulley mark with the 0 mark of timing case. The camshaft sprocket is at TDC when the hole in the sprocket lines up with the notch in the bearing cap Timing marks 2000 Toyota Corolla (1ZZ-FE
...crankshaft pulley then rotate engine a few times, check the timing marks again and check the belt tension, there should be a movement of 5 <>. 6 mm at the belts longest length, if not then ...
133 questions posted
Usually answered in minutes!
1,231 Questions
1,240 Questions
1,236 Questions
819 Questions
767 Questions