1986 Toyota Pickup 4WD "timing belt procedure" Questions

Ad

Question about Toyota Pickup

2 Answers

timing belt TIMING BELT & SPROCKETS R & I NOTE: Some procedures may differ slightly due to engine construction. Removal 1) Remove all necessary air ducts. Position No. 4 piston at TDC of ...

Ad

...timing belt you set it with #1 TDC "BUT" the distributor is timed with TDC #4 I found this the hard way and finally had to buy a cd with the procedures on it. Send me an e-mail address and I will ...

Ad

Question about Toyota Pickup

1 Answer

...belt snapped and punched a hole in the head and let water mix with oil. The distributor will not come out, the engine turns over, there is no oil in the radiator, and the pistons raise when the truck ...

Question about Toyota Pickup

1 Answer

...timing belt. Remove the crankshaft timing pulley. Raise the engine slightly and remove the oil pan. Remove the two bolts and nuts; remove the oil strainer and gasket. Insert a drift between the ...

Question about Toyota Pickup

2 Answers

belt warning lamp turns off or the procedure must be repeated. For the seating position being disabled, buckle then unbuckle the safety belt 9 times, ending with the safety belt unbuckled. NOTE: After

...timing belt replacement for 1995 procedure onn timing belt replacement for 1995 ford escort Go to my profile page and check out my Tip and Tricks for timing belt replacement 1.9L, there is an ...

Question about Toyota Pickup

2 Answers

...timing belt Replacing timing belt, requires complete step by step procedure, its not very easy process, but if there is exact procedure, then it gets easy to do this job.For complete step by step ...

procedure will have to be repeated. 3. Buckle then unbuckle the safety belt three times, ending with the safety belt unbuckled. This can be done before or during BeltMinder warning activation. 4. Turn

Question about Toyota Pickup

1 Answer

...timing belt on 2.5 First of all i will say, its not very easy procedure and its time consuming procedure.Do it in day time,ignore doing this job at night. The procedure is very long,click this link ...

procedure will have to be repeated. 3. Buckle then unbuckle the safety belt three times, ending with the safety belt unbuckled. This can be done before or during BeltMinder warning activation. 4. Turn

Not finding what you are looking for?
Cars & Trucks Logo

486 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...