...22r carburetor i replaced the head gasket 2000 miles ago and now it blew again i had the head milled and new head bolts and i used a felpro head gasket what do i do now? The 22R engine is one of the ...
gasket,I personally use these as they are very forgiving on slightly warped and scratched head decks and inepensive also,but a severly warped head will require milling at a machine shop or replacement
Question about Toyota Pickup
...22r just had head gasket and timing gear and chain put in my 1986 toyota 22r engine. i don't know if they have vacuum mixed up or timing off. going down hill when you let off accelerator the truck ...
...head gaskets, even on the 22R motor, it sounds like it is about time to replace the head gaskets, usually about every 100,000 miles it is time to replace the head gaskets, is the coolant getting into ...
...22r the #1and2 cylinders are missfiering. Replaced plugs and wires and swaped out distributor with one off my old engine. Timed the engine at 0 degrees per the manual. Still missfires. i noticed when ...
...22r keeps blowing head gasket Ok so I have a toyota that had a water pump go bad and caused the engine to overheat which caused the head gasket to blow. I had the head machined flat and replaced the ...
...22r motor put in a year ago and now it needs a head gasket. Is this a yearly thing why would it keep blowing head gaskets and how do I stop it overheating fans may be cutting off or thermostat ...
...replacement part has one wire only. The oxygen sensor has to be somewhere between the head and the catalytic converter. In fact, some vehicles have one right before and right after the catalytic ...
22R) won't start just hear a click when you turn the key. Have already replaced the battery, battery cables, ignition key switch and starter. Any suggestions? turn on the head lights and while someone
346 questions posted
Usually answered in minutes!
914 Questions
745 Questions
525 Questions
407 Questions
393 Questions