2006 Toyota Highlander "turn maint reqd light" Questions

...MAINT REQD Light Reset on Toyota Highlander 2006, 2007, ...Turn the ignition switch to the "On" position, but do not start the engine ... This procedure should applies to the second and third ...

...mileage (not Trip A or B). Turn ignition off. Hold the same button down that you used in step 1. While holding the button, turn ignition to 'ON'. The 'Maint Reqd' light should blink and go out.

...mileage (not Trip A or B). Turn ignition off. Hold the same button down that you used in step 1. While holding the button, turn ignition to 'ON'. The 'Maint Reqd' light should blink and go out.

...MAINT LIGHT IS ON AND IT IS YELLOW Hello The Maintence light is on because you are due for a oil change or was not reset at the last service if you have just had a oil change then you can reset it by ...

...maint reqd light if video dosent work go to www.vehix411.com hold down odometer trip reset button ,then turn key to on, hold for 5 seconds or watch odometer for lines that move. sometimes you need to ...

...maint reqd light on 2001 Honda Accord? Hold "trip reset" , turn ignition key to the "on" position and continue to hold, it will start flashing after 10 seconds , continue to hold until it stops. ...

Maint Reqd" light turn on in a 2009 Toyota Matrix? I have a 2006 Toyota Matrix and recently the "Maint Reqd" turned on, I was told that it turned on because I needed to get an oil change. I got an oil

...Turn key to OFF position. That's it! The "MAINT REQD" light has been reset to warn you to change your oil in another 5,000 or 7,500 miles or so. Quickly push and hold the odometer button on your ...

...otherwise you will have to replace the gas cap. watch this free video instructions on how to reset your maint reqd light without a computer if the video dosent work go to www.vehix411.com "

...maint. required light on a 2005 toyota corolla ce. To reset the system. Turn the ignition key to the "OFF" position with the odometer reading shown. Turn the ignition key to the "ON" position while ...