2005 Toyota Tacoma "put key ignition humming noise" Questions

...or is key in ignition, also over-ride button by shifter. Auto's have safety micro switches in these places so not to have car in drive and start, "extremely dangerous" Try this first easily missed. ...

...put key into ignition turn key to on position do not try and start it. when you turn the to on position listen you should hear a hum noise from the fuel tank that will be your fuel pump working the ...

...ignition key. Mine was replaced under warranty but I believe parts and labor are around $1100 US at a dealer. Note, the dealer is the only place you can buy it, no aftermarkets to my knowledge. You ...

...put the key in, turn it to run and pause before turning it to start. Pause it until you hear a humming noise at the run position that stops. Then turn the key to start. What that does is allows the ...

...Put the key on ACC. Does anti theft light up and stop? If it keep flashing while your cranking then it is the ANTI -THEFT. (by the way the humming noise ifs the fuel pump). If the anti theft doesnt ...

...put the key back in the ignition and turned it on. The engine then stopped trying to turn over, I tried a few more times after that, and it continued to turn over by itself when i put the key to the ...

put your ear next to it. then have someone turn the key to the "run" position without turning the engine over.  you should hear a slight humming noise for about 3 seconds when they do this.  

put key in ignition as though it was pressurising the system, it no longer makes this noise and wont start. i have tried a search and i cannot find where the 02 sedona offered a diesel option motor, i

...put a new starter in my 91 bravada. It cranks but doesn't want to turn over. I replaced my ignition coil but does the same thing still. What could be the problem Cranking & turning over are the ...

...key on for a secoond or 2. If there is lots of fuel then replace the filter. If fuel just dribbles replace the pump. If you have to work on the fuel pump, make sure the electrical connections are not ...