2004 Toyota Sequoia "change bank 1 sensor" Questions

...bank 1 sensor 1 heated O2 sensor. 1) If I change the sensor, will the lights go out? 2) How difficult is it to change this sensor? It is not hard to change the sensor, it just screws into a threaded ...

...up. Should I change bank 2 sensor 1? freeze frame data bank 1 sensor 1 rich -0.5 to -10.5 bank 2 sensor 1 lean +19 to +52 You would better served if you changed all of them, they are the same

...Bank #1 is the side of the engine that contains #1 Cylinder. Please remember if you are going to change one 02 Sensor then you should change all of them and be sure to clear all codes after all ...

...bank 1 oxygen sensor #2.So I changed the oxygen after the converter and the fault code is still there.I did un-hook the battery to clear the code. Bank 1 sensors are all the o2 sensors before the ...

...change a fuel bank sensor #1 code p1135 on how to change a fuel bank sensor #1 code p1135 on a 2002 tacoma prerunner 3.4 had parts store put a computer the truck P1135 Air/Fuel Sensor Heater Circuit ...

...change the bank 2 sensor 1, or there may be other problem? Thanks. Here is a forum from Lexus owners discussing the same problems that you are ...

...on bank 1 there is nothing wrong with the timing chain position . Just a series of sensors that have gone outside the set parameters so if you check and change each one you will clear the

...change. Oxygen sensors are always numbered like this: Bank 1 sensor 1 Bank 2 sensor 1 Bank 1 sensor 2 Bank 2 sensor 2 Some manufacturers use a kind of shorthand that reads different, but means the ...

change the sensor. Disconnecting the negative(-) should reset the computer and allow the fuel/air mixture to return to default allowing the engine to start. P0130 - O2 Sensor Circuit Malfunction (Bank

...bank one sensor one.That is the sensor on the side with cylinder one and before the catalytic converter.The computer is trying to change the fuel mixture to correct what it sees coming from that ...