2001 Toyota Camry "causes air pump full water" Questions

...pump Hi there! Check the large rubber tube going from the air filter to the throttle body. I had one of these that would do the same thing, and this was the problem. The "Air horn" (dealer calls it ...

pump could be faulty Myself I would Hit The intake with some starting fluid but have some water close bye if needed...Now Crank the Camry and see if it starts ..if it does then dies then I know i have

...air on but when I noticed the gauge going up, I turned it off & pulled over, turned the car off but the gauge was in the red by the time I turned the car off. I had it towed home (I didn't want to ...

...pump one pipe get hot try some comma's? my wild guess, is you are trying to fix a dead cab heater, right? and if so, can be caused by 5 things wrong. total. 1 engine coolant not hot (180F or more) 2; ...

pump will have just sluggish performance and overheating engine, not boiling over. hope this will help you - do not forget to vote... i just saved you $400.00 or more for radiator specialist... f your

...air. Hello, and thank you for choosing fixya.com. First, if not already, replace the thermostat. Follow the top radiator hose to the top or front of the engine. There should be no less than to bolts ...

...air? yes a bad water pump will cause it not to circulate the coolant through the heater core,find your coolant leak 1st is it leaking into the cab on the passenger side of your truck? thats another ...

air because to low. If coolant level is full, the vanes on the coolant pump might be spinning on the shaft, in which case you will have to replace the pump. Low coolant level will cause this. A vacuum

...Assuming the water pump is working correctly, my first guess would be air in the cooling system. It has to be bled after repairs are made to get the air out and make sure it is full of liquid

...pump did you replace the thermostat? If it is sticking it will overheat. The 944' s are picky about getting all of the air out of the cooling system. Don't forget to use the bleeder bolt. Also if it ...