2000 Toyota Land Cruiser "crank" Questions

1998 100 Series Landcruiser won't start. Cranks and has fuel pressure. Sometimes fires once, but won't start. Mostly just cranks. Any ideas? 1998 100 Series Landcruiser won't start. ...

Remove Window Crank I would like to take off the window crank from my 1988 Toyota Landcruiser Behind the crank is a clip that looks like this: There is a special tool to remove these. If you do not ...

engine cranks but will not start Engine cranks but will not start: 1. Fuel pump control circuit. 2. Engine Compression. 3. Ignition system. Note: Crank the engine continuously for 5 Sec, and pull up ...

THE TOYOTA GARAGE SAY THAT I NEED TWO OIL SEALS IN THE FRONT OF MY CRANK FOR A TOYOTA LAND CRUISER 2001 4.2 D. I HAVE GOT A OIL LEAK ON THE BACK OF THE CRANK PULLEY. 2 . WHAT CAN HAPPEN IF YOU DRIVE ...

i have an 800 amp battery for my 1995 land cruiser. how many cold cranking amps should my battery have? Hi: The Specs on a Battery Range From 600 Cold Cranking Amps to 750 Cold Cranking Amps. So if ...

what are the engine bolt tnsions for a toyota 3f engine. Crank, Rod and head bolts. Thanks conrodbearing cap to con rod62-68 ft lbs crank bearing cap to block 93---- 102 ft lbs head to block ...

..., the EFI has power (that's it) and goes out running (and no DTCs stored) the CEL has no meaning cranking, but can go out over 300 rpm. what does COUNT is a scan tool, (any works , in USA) it

I can't get the nut off the crank shaft pullry. the torque of this bolt is 304 ft/lb!!! need lock flywheel and big breaking bar will need to use an air impact driver for most crank shaft pully bolts ...

1988 toyota hj75 land cruiser when my motor is at running temp it is very hard to start just cranks and cranks over then finally starts Repelce fuel filter, check is there any fuel leak, also check ...

1991 land cruiser inline 6 running fine then died while driving. Electrical seems ok, engine cranks but won't start. Fuel pump? Alternator? thanks check for spark first. if theres spark then crack a ...