1998 Toyota Camry "remove distributor" Questions

...remove the distributor cap, then the distributor. With the valve cover still off, loosen the 2 bolts that clamp the distributor down. Remove the 2 terminal leads going into the distributor (4 wire ...

...remove the distributor(but make sure you mark it before taking it off so you won't get it out of timing)then remove the old o-ring that is on the distributor shaft and replace it with a new ...

Remove the distributor cap with the wires attached, and remove the packing. Mark the position of the rotor relative to the housing and pull the rotor straight up and off the shaft. The distributor cap

...remove the distributor assy.? All you need is to buy the o ring seal and replace the old worn out o ring. mark the distributor position w/paint or permanent pen before removing the assy. this a quick ...

...rplaces head gasket, spark plus distributor cap. Its possible that your timing is off since you removed the head and distributor cap, and probably the timing belt. The camshaft, crankshaft and ...

can not remove rotor or distriubitor on 94 camry DISTRIBUTOR CAP HELD IN PLACE BY 3 SMALL SCREWS PULL THE ROTOR OFF DISTRIBUTOR SHAFT.

...remove the distributor cap first and make a mark where the rotor button is pointing... (if you have to loosen the wires to get enough slack... it is easiest to pull them off the spark plugs and leave ...

distributor is turned all the way foward or back with a high advaned timing. ------------------------------------------------------------------------------------------------ What's going on and how to

...remove spark plug wires from the distributor on a 1992 camry 3.0l 6 cyl they have some sort of cover for each wire Please don't forget to rate! Disconnect the negative battery cable. Label and ...

remove a distributor 1995 Toyota camry See here p13 http://www.turboninjas.com/camry/ig.pdf Take care if you remove the plug leads from the distributor cap (you should not need to) as the plastic hold