1998 Toyota Camry "remove cam gear timing" Questions

Ad

Question about Toyota Camry

1 Answer

you will need to remove the timing cover and inspect the seals behind the cam gear, crank gear, and oil pump drive gear, and the oil pump to block seal. The most common leaks on these are the cam gear

Ad

...cam gear. The harmonic balancer has a notch on it, which you align to the "0" on the lower cover. The belt has alignment marks on them normally crank gear is the dotted line and the cam will be the ...

Ad

remove the timing belt is to study and see if you can identify the marks.Its been a long time I worked on a Camry but I still remember there is a mark on the cam gear that should be at 12 o'clock then

...remove big end gear wheel, to take cover off to put new belt on. Once that is done what do i need to know to put it back in properly, or how do i line everything up? Engine is stiil in the car. you ...

...location. http://www.turboninjas.com/camry/eg1.pdf replace it You need to remove the timing belt and cam gear to access the oil seal, i would suggest to have it done by a certified mechanic. ATV ...

Question about Toyota Camry

1 Answer

...if theres no spark then check the cap ,rotor and disturbutor, also make sure your timing belt didnt break, remove upper cover and spin engine cam gear should turn, well start there, hope this

Question about Toyota Camry

1 Answer

...cam gears have a dot punched into them near a certain tooth. This is where the solid white lines will line up with. The crank gear will have a dot also. It will line up at 90 degrees from the top, ...

...Remove the valve cover. One of the cams has a spring loaded gear on it that has a bolt hole to install a bolt on it so the second half of the gear does not loose pressure. I believe that it is the ...

Question about Toyota Camry

1 Answer

...gear and the cylinder head. Rotate the cam until the hole aligns with the punch mark. Once aligned, then rotate the crankshaft until the 'V' cut out on the crankshaft gear aligns with the ...

Question about Toyota Camry

1 Answer

cam gear cover and in order to remove replace the water pump you have to remove the timing chain which drives the water pump. This is about a 3-5hr job for a modest mechanic. The trick is insuring you

Not finding what you are looking for?
1998 Toyota Camry Logo

2,329 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1995 Toyota Camry
1995 Toyota Camry

1,828 Questions

1994 Toyota Camry
1994 Toyota Camry

1,753 Questions

2002 Toyota Camry
2002 Toyota Camry

1,303 Questions

1996 Toyota Camry
1996 Toyota Camry

1,134 Questions

1997 Toyota Camry
1997 Toyota Camry

1,141 Questions

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...