is a toyota 1988 2.0 camry an interference motor timing belt I paaked my caa in haavaad yaad
Question about Toyota Camry
...motor, the timing belt broke.the crank would turn to the tdc marks easily until I got out the crankshaft bolt. Its hard to turn, jumps past the mark. What could be the problem? I would say possibly a ...
Question about Toyota Camry
...motor if the timing belt broke while i was driving? Whether 4-cyl or V6 there should not have been any, as these are non-interference engines, that is, the pistons do not hit the valves when timing ...
My 1998 toyota canry timing belt broke. Is this an interferance motor? Did It destroy the engine? no you most likely bent valves on inlet side, pull the head and check for any other damage it all ...
...motor was an interference motor. Is the motor done? Is it worth a try to put in a new belt and see if it run. It went out while driving on free way. At highway speeds it may have bend some valves, is ...
...a 4 cylinder it has a chain. If it is a 6 cylinder it has a belt. it has a timing belt. These are interference fit motors and if the timing belt is not replaced at recommended mileage intervals the ...
Is the 2.2 a zero tolerance moter It is a non-interference motor.
98 cammry is it a inerferance motor From my experience the 2.2 5S-FE is a non-interference engine
...how to to align the marks on the motor balance shafts on a 2001 toyota camry I use a manual. You really need to get one.Timing is a critical part of engines... Especially if it an interference
Is 95 toyota camery 2.2a interference motor my email is [email protected] not roger_mayes1 No, this engine is not an interference design. Nor is the V6.
2,329 questions posted
Usually answered in minutes!
1,828 Questions
1,753 Questions
1,303 Questions
1,134 Questions
1,141 Questions