...bolt head you can grip with a pry bar and the appropriate size socket, some have a square hole where the socket - drive pry bar will fit directly, but the age old plain pry bar can be used by itself ...
...size with the new replacement belt. 5 Observe the belt routing diagram in the engine compartment. 6 Install the new belt over each of the drive pulleys. Often the manufacturer recommends a sequence ...
...size socket and loosen the four small bolts on the pulley.DO NOT TAKE THEM ALL THE WAY OUT YET. find the tensioner pulley and put a socket on the bolt and lift the pulley to release the pressure on ...
...bolt. Whenever the size difference between the 2 measurements exceeds 0.0091 in. (0.23mm) the head bolts must be replaced. Apply clean engine oil to the bolt threads and seating surfaces and tighten ...
...bolt. Whenever the size difference between the 2 measurements exceeds 0.0091 in. (0.23mm) the head bolts must be replaced. Apply clean engine oil to the bolt threads and seating surfaces and tighten ...
...size so please pick the applicable motor: 4.6L Engine CAUTION Fuel injection systems remain under pressure, even after the engine has been turned OFF. The fuel system pressure must be relieved before ...
...tensioner and pushing towards back of car remove the serpentine belt. Now remove the 4 bolts that hold the pully onto the waterpump. Now loosen the motor mount (you will have to swing it out of your ...
2,329 questions posted
Usually answered in minutes!
1,828 Questions
1,753 Questions
1,303 Questions
1,134 Questions
1,141 Questions
