96 T-100 my turn signal r not working hazards work fineI checked all fuses under dash and engine As you've eliminated all the obvious causes and as the hazards won't work if the flasher relay is ...
...on my 1996 toyota t100 wont work what could be wrong Check to see if your hazard lights work .If they dont you need a flasher. if they do you stillmay have a seperate flasher for your turn ...
...turn signals and their instrument cluster (IPC) indicator. When the hazard switch is pressed, the switch contacts are closed and the turn signal/hazard flasher module hazard input is grounded. In ...
Question about Cars & Trucks
...turn signals work ? What controls them ? More then likely it's a problem with turn/hazard flasher module. Turn Signal/Hazard Lamps The IGN E 10 A fuse in the underhood fuse block supplies battery ...
Question about Buick Cars & Trucks
...turn signals will operate only with the ignition switch in the RUN position and will not operate during hazard flasher operation. When the ignition is turned to the RUN position, battery voltage is ...
...turn signals and 1 for hazard.The hazard flasher is located in the convenance center the turn flasher in the fuse box. Also seperate fuse's for each. One battery circuit for hazard Ignition for turn ...
Question about Cars & Trucks
...turn signals don't need location of turn signal switch or are they one of the same You mean turn signal flasher? No, the hazard flasher and turn flasher on older cars were separate. Often, the hazard ...
...Turn signals do. Changed relay. Nothing. Ugh. 1992 oldsmobile cutlass supreme You changed the hazard flasher or the turn signal flasher? It has two, one for the hazard and one for the turn signals ...
Question about Toyota T100
...turn signal flasher and a hazard flasher. They are two different parts. If you replaced the hazard flasher and not the turn signal flasher than I would start by replacing the turn signal flasher. One ...
turn signals wont work fuses are good? the hazard switch above the radio is your problem. if you put on your signals and they don't flash turn hazards on then off and they will flash. (changing this *
266 questions posted
Usually answered in minutes!
129 Questions
92 Questions
62 Questions
72 Questions
53 Questions