2005 Scion xB "clutch engaging relay hot" Questions

Air condition blows hot air Do indeed fuse or relay switch this could be caused by the fact that the system may be low on refrigerant, not enuff and condensor will not allow the clutch to engage.

...clutch relay is inop, or AC compressor fuse is open (blown). A search of Google images will give you the location of the AC relay. You can pull out the relay, carefully remove the cover, reinsert the ...

...clutch relay There is no "clutch relay" on your vehicle.  However, there is a starter relay which is patially controlled by the Clutch Pedal Position (CPP) switch.  This is not very likely ...

...clutch engaged fans working feron loaded still blowing hot air brand new compressor all new parts cant figure why its still blowing hot air all relays are good and fuses. feron is good fan works ...

...clutch it runs,bypass relay runs,replaced relay no good. Relay will not engage if pressure switch thinks freon is low. This switch does sometimes fail. If you are sure freon is ok, use jumper wire to ...

...clutch not engaging clutch is not engaging. I measure and it has gas. I change the clutch relay and still not engaging. Still just blowing hot air. The best solution you'll get from books at ...

...engaging,the clutch on the front of compressor may be faulty..remove a/c clutch relay from fuse block underhood and jump relay pins 30 and 87 with engine running..clutch should engage..make sure you ...

your wiring, you could probably check voltage and ground for compressor, hvac on.
In the diagram, you see applicable fuses--clutch relay-- the top wire at ac clutch is voltage--black wire is ground

...Hot Wire A/C Clutch... no go. Not seeing Power to A/C System. Blower Fan Blows... Fuses OK... Relays OK... Hidden Fuse?? What year is the truck, and where did you run the hot wire from ? If the ac ...

...relay, or open winding in compressor clutch. sorry, I don't have a solution, but I do have a similar problem. There is refrigerant in the system, the fuse is good and I had the relay tested and that ...