1991 Peugeot 405 "gear box" Questions

gear box THERE IS A GRINDING NOISE COMING FROM GEAR BOX CABLE SEEMS FINE AND IT GOES INTO GEAR PROPERLY. WILL IT JUST NEED OIL check the gear oil in it, it sounds like it is low they will usually ...

box it stays in gear. Peugeot dealer reckons its an 8 hour job to take off and replace the box. Cost about £1000 if they repair the gearbox. Seems a bit too much for a 10 year old car. sometimes a nut

Gear box does not change gears. My gearbox has been slow on changing gears especially from gear one to two. when I changed the gear oil the problem was a bit solved because it started to change easily

I have a Peugot 406 Diesel estate (R), unable to engage any gears and gear lever loose and floppy. Can't drive the car at all. Any suggestions? Gear Linkage from the gear lever to the gearbox may have

...Sounds like a second gear syncro problem. Probably fork selector on syncro is dodgy, could need replacing. If you can do it yourself Take box off and strip it down, buy part and replace worn

boxer van will not go in first and third gear sounds like gear selector has gone maby need a new gear box

gear box needs changing and im sure the code is BE3/5 S1. My question is can i use any other gear boxes on this engine?? i.e a 16v gearbox or a 6speed?? Yes you can no problems as such ,just make sure

...the car hesitates, making a tick tick noise for a few seconds then picks up to normal speed after. whats wrong???? your gear box have started to develop a problem.the earlier you fix it the

...307 sw hdi, it started with a plastic sounding grinding noise then no 5th gear any idea's what it could be sounds like the baulk ring has broken up ,you will need to replace this or get a recon

...gear box moving, I could not get a gear and then noticed the gearlever was in a different position (going round a roundabout) once staight I was able to get the gears again. Is it a problem with the ...