1990 Peugeot 405 "car not start" Questions

Ad

good 15-20 minutes and put them back and check your remote key and try to start your car. If nothing happens then let your car diagnosed by a experienced mechanic who is able to read out the ecu codes

Ad

...CAR THEN CUTS OUT ,WONT START ,THEN AFTER A FEW MINUTES WILL START AGAIN ,TEMP GAUGE STATES NORMAL ,THEN THE WHOLE SEQUENCE STARTS AGAIN ! SOMETIMES ,HELP PLEASE DRIVING ME NUTS ,ENGINE TEMP SENSOR ...

Ad

...? what can i do There is a small chip in the key fob that if it moves to far the car will crank and not start so open the fob and check the position of the chip is in the bottom left of fob in ...

...car will not start as it seems immobiliser is a problem drove car in tesco garage turned engine off left keys in ignition went in shop and got cigarettes come back out turned ignition key and the car ...

car will start and run all day.Leave overnight and it will not start again until bled. expensive to repair properly,quick fix??? fit two non return valves ,one in the feed and one in the return to the

...car will not start, no tickover when key is turned, electris seem ok,it just seems dead when i try too start it ??any advice please? might be a loose ground, I would check the starter first. Same ...

...1.8 petrol Which will not start this is not the battery. At random the car will refuse to start can turn the key dash will light up but engiew does not even try. plz help may be a starter moter ...

Question about Peugeot 405

1 Answer

car won,t start The car usually starts but every now and then when I turn the key nothing happens. The battery light does not illuminate. The battery has been checked and is fine. When I turn the key ...

...car would not start, has this got to do with sensors maybe? but what should mention is that the car is swinging(turning the ignition on) but would not run the engine PLEASE HELP ME. plug in your ...

...start. Peugeot dealer could not recreate fault. Immobiliser now disconnected but fault recurred. Any possibility of bimetallic strip failing in fuel injector ? Any other ideas ? (Nb low temperature ...

Not finding what you are looking for?
1990 Peugeot 405 Logo

149 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1991 Peugeot 405
1991 Peugeot 405

451 Questions

2005 Peugeot 405
2005 Peugeot 405

805 Questions

1989 Peugeot 405
1989 Peugeot 405

164 Questions

2006 Peugeot 405
2006 Peugeot 405

161 Questions

Top Peugeot Experts

xxxxxx xxx

Level 3 Expert

5117 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...