2005 Peugeot 405 "remove slave clutch cylinder 1998" Questions

Ad

...remove the slave cylinder to investigate, please? Thanks Kam I understand these cars have a sealed clutch system. When they fail you replace the whole kit master,hydrolic pipe and slave (comes in one ...

Ad

...slave cylinder Remove the transmission. NOTE: Examine the clutch housing for traces of brake fluid. If fluid is present, install a new clutch slave cylinder. Remove the clutch slave cylinder. Examine ...

Ad

...clutch MASTER cyliner and/or a SLAVE cylinder.. MOST likely being the slave cylinder. if the pumping action doesnt cause it to disengage then you have a burnt out clutch. The system is hydralic and ...

slave cylinder you have to bleed it - remove the air. The easiest way of doing this is to make sure the reservoir is fill of fluid, crawl underneath the car with a spanner/wrench, place a rag over the

...slave cylinder is leaking and to replace it you will need to remove transmission from vehicle. while your there you should change the clutch because it is out. unless it was just change then just the ...

...slave cylinder line to remove air still no clutch-and need to know adjustment sequence. Is it the hydrolic clutch pressure system or???? hOW DO i adjust my clutch? Almost every time a clutch is ...

...slave cylinder, get someone to push the clutch pedal down then check the movment hold that down and make sure the clutch lever travels about 1"stays out.if it does not then theres a fault, you can ...

...How do I remove it so I can replace it? there should be two bolts/nut that hold the master cylinder. look under the dash on top of the clutch pedal could be the slave cylinder. mine went on my

...remove hyd line from slave cylinder First open bleeder screw and drain clutch fluid.While slave cylinder is in place,loosen hydraulic line,then remove bolts holding cylinder to transmission,then ...

remove the transfer case when R&R the clutch slave cylinder on a 1998 Chevrolet Silverado 2500 4WD Any pointers to R&R of the clutch slave cylinder are welcome! It is not absolutely necessary,

Not finding what you are looking for?
Cars & Trucks Logo

1,103 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1991 Peugeot 405
1991 Peugeot 405

451 Questions

1990 Peugeot 405
1990 Peugeot 405

103 Questions

1989 Peugeot 405
1989 Peugeot 405

164 Questions

2006 Peugeot 405
2006 Peugeot 405

161 Questions

Top Peugeot Experts

xxxxxx xxx

Level 3 Expert

5117 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...