2005 Peugeot 405 "air bleed coolant system" Questions

Ad

...air valve that opens the heater from hot to cold and is worked by vacuum and if the pipe is split then you wont get the heat etc. also change the thermostat and open the heater to hot before bleeding ...

Ad

...things, either a build up in your evaporator box, (which is caused by blockage in the drain tube, or you have an air picket in your coolant system, which means it will have to be bleed. Hope this ...

Ad

Question about Peugeot 405

2 Answers

...air locks in cooling system, there is a bleed in the top right corner of the engine bay looks like a dust cap off a tyre valve, there is also one on the stat housing on the left hand side of the head ...

...bleed the air out Bleeding the coolant system Leisa, Check the attached links,instruction and guides on bleeding cooling systems. Good luck "I hope this helped you out, if so let me know by pressing ...

...air bleed valve on it and you need to bleed the air out manually. To bleed it you will have to crank engine and get it warm. Touch top radiator hose to see if its warm. If not then the thermostat has ...

...BLEED AIR OUT COOLANT SYSTEM.WAIT UNTIL ENGINE COOL DOWN.REMOVE COOLANT OVER FLOW PRESSURE CAP.IF YOU HAVE 3.1 OR 3.4 ENGINE OPEN AIR BLEED SCREW ON WATER PUMP BYPASS HOSE.OPEN BLEED SCREW.WATCH ...

Question about Peugeot 405

1 Answer

...with 50/50 mix. I noticed a bleeding unit on the mail coolant hose. What is it for?oolant is low. bleeding system? Hi.You have to open that bleeding screw until all the air is out of the cooling ...

.... Turn the radiator cap until you hear air hiss out. Let it bleed until only coolant wants to come out into the reservoir. The car must be running to operating temperature when you blled the

Question about Peugeot 405

1 Answer

TO BLEED THE COOLANT SYSTEM CORRECTLY TO GET ALL AIR POCKETS OUT OF LINES AND RADIATOR/HEATER CORE AND LINES Old methos id to leave the raditor cap off and squeeze the coolant hoses to get the air out

...bleed air from system if need be. if air is trapped in system you will not get any heat. start car let it run take cap off of coolant tank then find bleeder for the coolant system, open bleed screw ...

Not finding what you are looking for?
Cars & Trucks Logo

1,103 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1991 Peugeot 405
1991 Peugeot 405

451 Questions

1990 Peugeot 405
1990 Peugeot 405

103 Questions

1989 Peugeot 405
1989 Peugeot 405

164 Questions

2006 Peugeot 405
2006 Peugeot 405

161 Questions

Top Peugeot Experts

xxxxxx xxx

Level 3 Expert

5117 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...