...testing ,code scan ,we'd only be guessing . Very complex , the untrained person hasn't got a pray of fixing this . You have no idea what your dealing with . Vehicle Dynamic Suspension The vehicle ...
Question about Mitsubishi Montero Sport
...rear sensor compressed.The control module is not commanding the relay to turn on. I have no way to retrieve trouble codes for air suspension. Could my rear sensor be the problem and if not where do I ...
Rear air suspension control (RAS) module (5A919) Snorkel Drier Air compressor (5319) Air suspension switch (5K761) Solenoid valve (5311) Air spring (5560) Air suspension height sensor (5359) Air line
Question about Cars & Trucks
...rear wheel steering control module ?€¢ The remote playback device-CD player w/U1S ?€¢ The transfer case shift control module ?€¢ The transmission control module (TCM) w/Allison Transmission ?€¢ The ...
...control module 2006 explorer I replaced the rear parking assist sensors yet I am still getting a "Check park assist" light. I check the fuse and it's ok. I need to know how to replace the Control ...
Question about Cars & Trucks
...Rear Wheel Steering Control Module (RWSCM) • Inflatable Restraint Sensing and Diagnostic Module (SDM) • Transfer Case Shift Control Module (TCSCM), w/NP1/NP8 • Vehicle Communication Interface Module ...
rear wiper motor control circuit. The rear wiper motor control circuit is supplied a battery positive reference voltage by the rear wiper motor module and is pulse width modulated to ground by the LGM
Question about Mitsubishi Montero Sport
rear integration module (RIM). Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? Yes - Go to Step 11 NO
rear of the vehicle is raised above trim under normal driving conditions, this will cause the air to be vented from the air springs to lower the vehicle back to its trim height level. Compressor Relay
Question about Mitsubishi Montero Sport
...testing ? Rear Vision Camera System Does Not Display Ignition OFF, disconnect the harness connector at the rear view camera image display module. Test for less than 1.0 ohm between the ground circuit ...
341 questions posted
Usually answered in minutes!
594 Questions
427 Questions
263 Questions
124 Questions
6 Questions